ANSONIA COPPER & BRASS, INC.

 

BRAZING ALLOY DATA SHEET

 

BR120

 

 

Ansonia Copper & Brass BR120 is a high strength, yet relatively economical filler metal containing Nickel and manganese to improve wetability.

 

Joining:   BR120 is suitable for Induction, Furnace, or Torch and Gas-air burner joining.

 

 

Applications:  Typically used for Mining and Construction tool brazing, providing high strength when joining Carbides (Tungsten or other) to alloy steels where Zinc is acceptable.

 

 

Applicable Specifications:  Internal Specification ACB BR120 

 

Standard Forms Available:  Round wire and Flat Wire.  For other forms, please inquire.

 

 

PROPERTIES OF   ALLOY   BR120

 

Nominal Composition:    Cu:  54.85%    Zn:  25%    Ni  8%    Mn:  12%    Si  0.15%

 

 

Phisical Properties:

 

Melting Point (Liquidus):   1615F / 879C                                                               

Flow Point     (Solidus):    1700F / 927C

Density at 68F: 0.290 lbs/cu in

Electrical Conductivity at 68F (volumetric): 6.0 IACS

Color :  Light Yellow

 

 

Mechanical Properties:

 

 

 

Tensile Strength

(psi)

Yield Strength

(0.5% Ext.) (psi)

% Elongation

(4 x D)

Rockwell Hardness

Nominal Values

 

 

 

 

Annealed 0.200” dia wire

80,000

38,000

45%

 

 

 

 

 

 

 

 

ADS No.                                               Rev. No. 0                                      Rev. Date 01/15/03                                                                                          

 
P. O. Box 109 – Ansonia, Connecticut 06401                                                                  725 Bank St. – Waterbury, Connecticut 06708

Tel. 1-800-521-1703     Fax 203-735-3787                                                                       Tel.  1-800-243-3204     Fax  203-756-1330

 

The statements and data provided on this data sheet are to be considered only as a general guide.  Commercial variations in material properties are expected, so values listed here are not intended to be used for specifications.  Please consult the appropriate industry specifications where applicable.  Ansonia Copper & Brass, Inc. also cannot assume responsibility for performance of these products in service because we do not control or supervise subsequent use of our products.